309
edits
Use Phonak Classroom Speakers: Difference between revisions
→Instructions on how to use the Phonak System
| Line 22: | Line 22: | ||
An instructional video about how to use the Roger Touchscreen Mic can be viewed here: '''[https:// | An instructional video about how to use the Roger Touchscreen Mic can be viewed here: '''[https://drive.google.com/file/d/1J8XNFFR0TXDFiV3yR63H1T9LGtKeIs9G/view?usp=drive_link Roger Touchscreen Mic video]''' | ||
'''Note''': This video has information '''after''' the 3-minute mark which does not apply to our use at Riverdale. '''You may also need to click through a Youtube advertisement or two before viewing the video.''' | '''Note''': This video has information '''after''' the 3-minute mark which does not apply to our use at Riverdale. '''You may also need to click through a Youtube advertisement or two before viewing the video.''' | ||
| Line 46: | Line 46: | ||
'''Stand-mounted speakers''': Because these stands can be moved anywhere in the room, the speakers need to be in the front to be used most effectively. In some classrooms, you may need to reposition the speaker as part of the class session. | '''Stand-mounted speakers''': Because these stands can be moved anywhere in the room, the speakers need to be in the front to be used most effectively. In some classrooms, you may need to reposition the speaker as part of the class session. | ||
==Troubleshooting== | ==Troubleshooting== | ||
| Line 51: | Line 52: | ||
*Check to make sure the Digimaster speaker is powered on and has power. There is a power switch on the bottom and a barrel-shaped power connector which provides power to the speaker. When the speaker is powered on, a blue light will appear in a band underneath the word Phonak at the top of the speaker. If the light does not illuminate when you toggle the power switch to on, check to make sure the power connector is firmly in the socket. Then check the other end of the cable where it goes to the rectangular power brick. Make sure the power cable to the wall AC socket is pressed firmly into the power brick, and lastly, verify that the AC power cable is plugged into a working AC socket. | *Check to make sure the Digimaster speaker is powered on and has power. There is a power switch on the bottom and a barrel-shaped power connector which provides power to the speaker. When the speaker is powered on, a blue light will appear in a band underneath the word Phonak at the top of the speaker. If the light does not illuminate when you toggle the power switch to on, check to make sure the power connector is firmly in the socket. Then check the other end of the cable where it goes to the rectangular power brick. Make sure the power cable to the wall AC socket is pressed firmly into the power brick, and lastly, verify that the AC power cable is plugged into a working AC socket. | ||
*If the speaker does not seem to be loud enough, on the Roger microphone, swipe to the left to reveal screen 2, then tap on the Soundfield icon. This will bring up a volume slider bar. Slide the bar to the right to increase the volume. When finished adjusting the volume, tap the House/Home icon to go back. [[File:Soundfield.jpg|none|thumb|68x68px]] | *If the speaker does not seem to be loud enough, on the Roger microphone, swipe to the left to reveal screen 2, then tap on the Soundfield icon. This will bring up a volume slider bar. Slide the bar to the right to increase the volume. When finished adjusting the volume, tap the House/Home icon to go back. [[File:Soundfield.jpg|none|thumb|68x68px]] | ||
*On the Roger Touchscreen mic, bring the mic within 4 inches of a powered-up Digimaster speaker and tap the Connect icon on the touch screen. When the mic successfully connects, a message to that effect will appear on the touch screen.[[File:Connect.jpg|none|thumb]] | * On the Roger Touchscreen mic, bring the mic within 4 inches of a powered-up Digimaster speaker and tap the Connect icon on the touch screen. When the mic successfully connects, a message to that effect will appear on the touch screen.[[File:Connect.jpg|none|thumb]] | ||
*If the Connect icon does not pair the mic to the Digimaster speaker, and the Subnet icon is selected (green circle around icon), tap the Network icon to allow the pairing. Tap the Connect icon again, and follow the instructions above to pair the mic. | *If the Connect icon does not pair the mic to the Digimaster speaker, and the Subnet icon is selected (green circle around icon), tap the Network icon to allow the pairing. Tap the Connect icon again, and follow the instructions above to pair the mic. | ||
*[[File:Network_icon.jpg|frameless|58x58px]] | *[[File:Network_icon.jpg|frameless|58x58px]] | ||