In-class microphones should be used when deans or school administrators indicate a student is out for an extended period of time. Students are sometimes given the option to join a class Zoom and participate in remote listening. Because of this, it is important to know how to setup the microphones Riverdale offer in the event student(s) are off campus while school is in session.
 | |
|---|---|
 | |
| Summary | How to use and setup in-class microphones for remote teaching |
| Author | Maintained by Derek Smith |
| Help | Get help with this article |
| Status | in need of review. |
Why Use In-Class Microphones?
Using In-Class Microphones
Set-up Microphone
We have deployed a Snowball microphone on a height-adjustable stand to most Hill classrooms and teachable indoor spaces. The Snowball microphone has two distinct uses:
- Vocal mic for video voice-overs, Zoom sessions, and other occasions where your voice needs to be upfront, clear and crisp
- Omnidirectional mic for capturing class discussions
On the back of the microphone is a small switch found above the cable connection. Use the following settings depending on the type of class or desired recording:
- Position 1 is for close vocals
- Position 3 for classroom and groups
Connect Microphone to Laptop
Once you've put the microphone in the correct mode, make sure the microphone is plugged into the Anker hub. Every classroom has the same Anker Hub installed.
- Plug the microphone USB cable into the Anker hub (photo below)
- Plug the USB-C cable (from the Anker hub) into your school issued computer
- Check the audio source settings on your computer and make sure the classroom microphone is the default option
- In Google Meet, click on the three vertical dots icon, click Settings, and under Microphone check that the option is correct
- In Zoom, under the audio icon, click the arrow and select the proper audio source (the microphone)
Read more about this technology on the Hybrid Classroom AV page.
Current Riverdale Microphone Models
Here is an image of the model we're using at RCS. It is glossy black in color, and sits on a floor mic stand with a weighted base. When the mic is active and has power, the red LED at the top is illuminated. For vocal use, position the microphone a bit lower than mouth level, either standing or sitting. A 16' USB cable connects the microphone to the Anker USB-C hub for use in class.
