Howdoi Banner.png
People Graphic.png
Learning Instruction Community
Check Mark Graphic - Unchecked.png Check Mark Graphic.png Check Mark Graphic.png
SummaryConnect your device to RCS projectors and displays
AuthorMaintained by Derek Smith
HelpGet help with this article
Statusin need of review.

Basic Classroom AV Setup

AV setup in Hill Campus classrooms and other indoor teaching/conference spaces allow you to connect your USB-C laptop to enable:

  • Audio/video & interactivity link (if present) to a Epson Brightlink projector and the Kramer speakers connected to the projector
  • Audio-in connection from the classroom microphones
  • Charging power for your laptop

Anker Hub Diagram

Every classroom at Riverdale has an Anker Hub that allows you to connect your USB-C device and project to either the project or TV in that space. Refer to the image below for what the cables on the Anker Hub are used for:

  • A power charger is connected to the USB-C Input port, and an HDMI cable is connected to the projector on one side of the hub.
  • On the other side, the Blue Snowball is connected to one USB 3.0 port, while the second USB 3.0 port is used for the interactive connection to the projector.

Wall Plate Diagram

All physical connections to projectors and speakers are done through a wall plate. You can also connect to most classrooms' and larger AV installations through AppleTV.

Here's a diagram of a wall plate in most classrooms.

Some older wall plates may have a vestigial VGA port which may or may not work. Wall plates installed after 2017 will not have a VGA port. Please use the connection cable bundles with the HDMI cable & dongle appropriate for your computer, ChromeBook, tablet or iPhone.

 

Change Sound Input/Output Settings

On macOS

  1. Open System Settings
  2. Click Sound
  3. Click Click Output and select the projector/screen you want to output to
  4. Click Input and select the microphone source you want to use

On Windows 11

  1. TODO ADD INSTRUCTIONS HERE

Common Input/Output Audio Devices

  • Epson PJ
  • Samsung
  • Blue Snowball
  • DisplayPort (SAMSUNG)

Connecting to the Projectors in the Multi Purpose Rooms (MPR)

The Hill Multi Purpose Rooms are primarily used as a single meeting space with two projectors and screens displaying a single presentation source connected to one of three possible input panels on the West, Center and East locations; or through Apple TV. The MPR can be divided into two separate meeting spaces with full AV. The West panel, nearest the main entrance door, is most frequently used to connect devices for full MPR presentations, although it is possible to have each projector display a separate presentation from either of the other two input panels with the room configured as one space.

Using the touch pads

Touch pads West and East are adjacent to each entrance, and either can be used to control both sides of the room. The touch pad will usually be dark if it has not been used for a short amount of time. Tap the touch pad and the RCS logo will appear. Touch again and you should be presented with a row of persistent icons on the left side: Video Sources, Mic Volume, Tech Tools, and Off?. On the right side is a persistent MPR Full volume slider which adjusts the overall volume level in both rooms, and displays the current time and date.

  • Video Sources

When the MPR is being used as a single meeting space, the Video Sources command screen will indicate Rooms are in Combined Mode. Underneath this legend are five icons, West Panel, Center Panel, East Panel, West Apple TV, and East Apple TV. Underneath these icons are three zones: West Screen zone to the left, East Screen zone to the right, with Rear HDMI Plate zone centered below them. If you are presenting from the customary location using a cabled connection near the main (West) doorway, touch and hold-drag the West Panel icon into all three zones. To project just to the West screen, omit dragging the icon to the East Screen zone. If you have a macOS laptop or a iPhone/iPad, you can connect using AirPlay to the West and East Apple TV sources in the same manner as cabled connections.

  • Mic Volume

The MPR has five wireless microphones: three handhelds, one for each side, with an alternate; and two podium or table-top mics. The mics are found in the silver cart near the West entrance. Each mic has a separate control strip comprising volume down/up and mute buttons with a horizontal blue individual level meter.

Note: under most conditions, the use of microphones is not necessary. If mics are used by students, please inform them of their responsibility to respect the integrity of the equipment.

  • Tech Tools

This screen is mostly for advanced users. Each projector can powered on/off and each screen can be raised/lowered independently. The panel brightness can be adjusted. Lastly, menu commands for the Apple TVs can be entered. Please do not use this panel unless instructed to do so by a member of the Tech Department.

  • Off?

This panel is the last place you visit before disconnecting your device from the system. When you are done presenting, please tap the Confirm System Off button. This will turn the projector(s) off and raise the the screen(s). If you ever enter the MPR and you find the screens down and the projectors dark, turn the system off before connecting your device, then select the video source you need to use.