309
edits
Use Phonak Classroom Speakers: Difference between revisions
→Troubleshooting
| Line 53: | Line 53: | ||
*Check to make sure the Digimaster speaker is powered on and has power. There is a power switch on the bottom and a barrel-shaped power connector which provides power to the speaker. When the speaker is powered on, a blue light will appear in a band underneath the word Phonak at the top of the speaker. If the light does not illuminate when you toggle the power switch to on, check to make sure the power connector is firmly in the socket. Then check the other end of the cable where it goes to the rectangular power brick. Make sure the power cable to the wall AC socket is pressed firmly into the power brick, and lastly, verify that the AC power cable is plugged into a working AC socket. | *Check to make sure the Digimaster speaker is powered on and has power. There is a power switch on the bottom and a barrel-shaped power connector which provides power to the speaker. When the speaker is powered on, a blue light will appear in a band underneath the word Phonak at the top of the speaker. If the light does not illuminate when you toggle the power switch to on, check to make sure the power connector is firmly in the socket. Then check the other end of the cable where it goes to the rectangular power brick. Make sure the power cable to the wall AC socket is pressed firmly into the power brick, and lastly, verify that the AC power cable is plugged into a working AC socket. | ||
*If the speaker does not seem to be loud enough, on the Roger microphone, swipe to the left to reveal screen 2, then tap on the Soundfield icon. This will bring up a volume slider bar. Slide the bar to the right to increase the volume. When finished adjusting the volume, tap the House/Home icon to go back. [[File:Soundfield.jpg|none|thumb|68x68px]] | *If the speaker does not seem to be loud enough, on the Roger microphone, swipe to the left to reveal screen 2, then tap on the Soundfield icon. This will bring up a volume slider bar. Slide the bar to the right to increase the volume. When finished adjusting the volume, tap the House/Home icon to go back. [[File:Soundfield.jpg|none|thumb|68x68px]] | ||
*On the Roger Touchscreen mic, bring the mic within 4 inches of a powered-up Digimaster speaker and tap the Connect icon on the touch screen. When the mic successfully connects, a message to that effect will appear on the touch screen.[[File: | *On the Roger Touchscreen mic, bring the mic within 4 inches of a powered-up Digimaster speaker and tap the Connect icon on the touch screen. When the mic successfully connects, a message to that effect will appear on the touch screen.[[File:Connect.jpg|none|thumb]] | ||
*[[File:RogerMicLights.jpg|left|thumb|What the lights on a Phonak mic mean]]<br /> | *If the Connect icon does not pair the mic to the Digimaster speaker, and the Subnet icon is selected (green circle around icon), tap the Network icon to allow the pairing. Tap the Connect icon again, and follow the instructions above to pair the mic. | ||
*Indicator lights on Roger microphone:[[File:RogerMicLights.jpg|left|thumb|What the lights on a Phonak mic mean]]<br /> | |||
<br /> | <br /> | ||