Project in RCS Classrooms: Difference between revisions

Project in RCS Classrooms (view source)

Revision as of 11:34, 16 November 2023

206 bytes added , 16 November 2023

no edit summary

Mvanmierlo

1,365

edits

@@ Line 18: / Line 18: @@
 === Anker Hub Diagram ===
-Every classroom at Riverdale has an Anker Hub that allows you to connect your USB-C device and project to either the project or TV in that space. Refer to the image below for what the cables on the Anker Hub are used for:
+Every classroom at Riverdale has an Anker Hub that allows you to connect your USB-C device and project to either the project or TV in that space. Refer to the image below for what the cables on the Anker Hub are used for.
-* A power charger is connected to the '''USB-C Input''' port, and an '''HDMI''' cable is connected to the projector on one side of the hub.
+# To project, simply plug in the long-braided USB-C cable into your Riverdale laptop
-* On the other side, the Blue Snowball is connected to one '''USB 3.0''' port, while the second '''USB 3.0''' port is used for the interactive connection to the projector.
+# If you need to use a microphone, use this article on [[Use In-Class Microphones|classroom microphones]] to make sure the microphone and computer are setup properly and connected to the Anker Hub
+# If audio is playing through the speakers properly, or if the video is choppy, grainy, or lagging
+#* Check your input and output settings
+#* Un-plug the USB-C power input (shorter non-braided cable on the Anker Hub) and plug it back in again
-[[File:AnkerHub.jpg|left|thumb|Anker Hub]]
+[[File:AnkerHub.jpg|300x300px]]
 === Wall Plate Diagram ===
@@ Line 32: / Line 35: @@
 Some older wall plates may have a vestigial VGA port which may or may not work. Wall plates installed after 2017 will not have a VGA port. Please use the connection cable bundles with the HDMI cable & dongle appropriate for your computer, ChromeBook, tablet or iPhone.
-[[File:River Campus Wall Plate.png|400 px]]
+[[File:River Campus Wall Plate.png|300x300px]]
 ==Change Sound Input/Output Settings==